Trygstad-Motorsports.com
507-281-3545
800R PERFORMANCE
800 R PRODUCTS-2007-2012
We've been developing this 800R Engine since 2005 before production began and have more time developing this engine than anyone.
CRANK BALANCING
Rotax missed the balance on this engine by a mile which is the reason your clutch parts wear out and your hands fall asleep to vibrations created by this design flaw. We have the cure for this issue with our balance option which will make this engine smooth and free up hidden power robbed by this issue, includes, balancing parts, pin centers, weld pins if requested, assembling crank and case assembly, grease bearings with OEM Rotax Iso Flex grease,
$900.00 Plus parts (bearings, seals if needed)
CYLINDER PORTING
Our cylinder porting gains an average of 8 Horsepower. We have developed this product to gain on both midrange and top end power maintaining stock RPM range, Factory casting of ports are the reason some stock machines run better than others. We prep all cylinders to our developed specs, includes diamond honing of cylinders, rave mods, oem base gasket.
$500.00
CYLINDER HEAD MODS
We have the best available cylinder head for the 800R. Stock shell is machined for our domes and available for all elevations, 0-3000, 3000-6000 and 6000 feet and above. We have selected to use stock head shell which has the correct water flow for better cooling.
$290.00 exchange head required.
PISTONS- CARB and ETECH MODELS
We have installed our pistons in the Etech models with increased performance and durability over the past seson!
Our exclusive cast OEM weight SINGLE RING PISTON with a .5mm wider ring than oem Rotax , chrome face, tighter end gap outperforms all current pistons on the market today for horsepower created and durability, including Dual Ring versions being marketed. We have tested all piston designs and materials on extensive Dyno runs and in the field to come up with this design. We are on our 3rd year for this product.
$135.00 standard coatings, pin, oem circlips.
$165.00 special coating, skirts and tops for TURBO APPLICATIONS, RACE ENGINES
V-FORCE REEDS
The v-force reed petal is the best product made for the 800R Engine. Works best with cylinder porting and head mods.
$180.00 if purchased with engine work.
*We do not offer any aftermarket Y-pipes, single exhaust pipes, silencer cans for 800R models, no gains were found in our testing of any products available.
We've been developing this 800R Engine since 2005 before production began and have more time developing this engine than anyone.
CRANK BALANCING
Rotax missed the balance on this engine by a mile which is the reason your clutch parts wear out and your hands fall asleep to vibrations created by this design flaw. We have the cure for this issue with our balance option which will make this engine smooth and free up hidden power robbed by this issue, includes, balancing parts, pin centers, weld pins if requested, assembling crank and case assembly, grease bearings with OEM Rotax Iso Flex grease,
$900.00 Plus parts (bearings, seals if needed)
CYLINDER PORTING
Our cylinder porting gains an average of 8 Horsepower. We have developed this product to gain on both midrange and top end power maintaining stock RPM range, Factory casting of ports are the reason some stock machines run better than others. We prep all cylinders to our developed specs, includes diamond honing of cylinders, rave mods, oem base gasket.
$500.00
CYLINDER HEAD MODS
We have the best available cylinder head for the 800R. Stock shell is machined for our domes and available for all elevations, 0-3000, 3000-6000 and 6000 feet and above. We have selected to use stock head shell which has the correct water flow for better cooling.
$290.00 exchange head required.
PISTONS- CARB and ETECH MODELS
We have installed our pistons in the Etech models with increased performance and durability over the past seson!
Our exclusive cast OEM weight SINGLE RING PISTON with a .5mm wider ring than oem Rotax , chrome face, tighter end gap outperforms all current pistons on the market today for horsepower created and durability, including Dual Ring versions being marketed. We have tested all piston designs and materials on extensive Dyno runs and in the field to come up with this design. We are on our 3rd year for this product.
$135.00 standard coatings, pin, oem circlips.
$165.00 special coating, skirts and tops for TURBO APPLICATIONS, RACE ENGINES
V-FORCE REEDS
The v-force reed petal is the best product made for the 800R Engine. Works best with cylinder porting and head mods.
$180.00 if purchased with engine work.
*We do not offer any aftermarket Y-pipes, single exhaust pipes, silencer cans for 800R models, no gains were found in our testing of any products available.
800R PRODUCTS
Complete 800R rebuilds available, include BRP rebuilt crankshaft, custom pistons, all new bearings and gaskets, isoflex grease,
diamond hone cyl, assembled,
$1,250.00
with customer supplied engine
We stock new 800R short blocks, crankshafts and cylinders for all years.
We have new balanced cranks and case short blocks in stock for sale.
Call for prices and availability of 800R products, we can put one together for your specific needs.
Complete 800R rebuilds available, include BRP rebuilt crankshaft, custom pistons, all new bearings and gaskets, isoflex grease,
diamond hone cyl, assembled,
$1,250.00
with customer supplied engine
We stock new 800R short blocks, crankshafts and cylinders for all years.
We have new balanced cranks and case short blocks in stock for sale.
Call for prices and availability of 800R products, we can put one together for your specific needs.
